~3.1M-6.4M CNC FLAME CUTTING MACHINE~  
 
     
 
 
   
 
   
   
 
   

 

Features:

  • Gantry design for heavy duty:

  • Ensuring both precision and reliability. 

  •  Two full sized saddles, running on  Longitudinal guide rails:

  • Giving high precision and durability

  • Equipped with high performance

  • AC servo driver and motors:

  • High speed positioning and contouring speeds

  • Positioning speeds up to 18 m/min

  • The transverse guide rails:

  • Extra wide of parallel guide rails:

  • Stability and precision even with heavy

  • duty torch suspension units

  • Transverse energy feed chains:

  • Giving efficient transportation of

  • hoses and cables.

  • Gas distribution unit

  • ‧Central gas control system

  • ‧Solenoid valves for fuel gas

  • ‧Preheat oxygen, cutting oxygen

  • Gas control consol

  • ‧Gauges : High /Low Pressure regulator

  • ‧Automatic hole piercing system

  • ‧High /Low preheat control

  • Gas control consol near the operation panel

  • Providing a convenient operation

  • Plasma torch set control

  • ‧Precise initial height torch setting

  • ‧Integratedtorchcollisionprotection  

  • ‧Automatic torch centering

  • ‧A.V.C height sensing control

 

   
 
   
 
   
 
  Option:      
 
  Zinc powder marking torch

Torch height sensor (Capacitive)

           Water spray   Eelctrical ignition unit
 
Specifacation:              
Model DMF -3100D DMF -3700D DMF- 4000D DMF -5000D DMF-5500D DMF -6000D DMF -6400D
Effective cutting width(A) 3100 3700 4000 5000 5500 6000 6400
Effective cutting length 7000(mm)+X(mm)
Rail span (B) 4100 4800 5000 6100 6600 7000 7500
Total width 5200 5900 6100 7200 7700 8200 8600
Track length 9000(mm)+X(mm)
Cutting speed 1～6000 mm/min
Marking speed  MAX.12000 mm/min
Rapid speed  MAX.18000 mm/min
Cutting capacities(thickness)  1torch 250mm  2torches125mm   4torches 60mm
Automatic hole piercing  200mm(1torch)
Gas supply   Oxygen and Acetylene or LPG
Power supply                            3 phases,220V,60Hz,5KVA or on request
CNC : (NUM 1020 or Burny 10 Can be optioned)   
NUM1020: BURNY 10 LCD Plus:
10〞CRT & Membrane panel PC Based NC controller(XP-inbedded operation system) 
Manual data input (MDI) Industrial Grade 15〞TFT LCD with Touch Screen 
Program memory capacities 256K bytes Membrane panel for Cycle Start/Cycle Stop/Go To/Reverse 
3.5" disk driver for NC program input/output 256 MB DDR RAM ,30GB hard drive ,USB,1.44MB floppy drive
Chinese/English display 50 pre-programmed commonly used standard shapes
Input code: EIA or ISO Accepts either ESSI or EIA RS274-D programming formats
Optional:
1.Zinc powder marking torch                 2.Torch height sensor(capacity type)      3.Electrical ignition unit                     4.Plasma        5.Extensions of the rail and rack by 3000mm(X)     
*This information is subject to change without prior notice.
   

 
Address: No. 18 Gong Yeh 33 Road, Taichung, Industrial Park Taichung City, Taiwan, R.O.C.
Tel: 886-4-23594959
Fax: 886-4-23594958
Contact Person: Lingo Chang
E-mail: damatech@dama.com.tw
HTTP: http://www.dama.com.tw