|
~
CNC DRILLING MACHINE FOR JOINT-PLATE ~ |
|
|
|
Features: · With interactive command and color display, easy learn and easy operation · With linear, matrix and flange drill pattern. It would not need the G, M code program. · With simulation function, it also can indicate which hole will be drilled by moving coarser · It is possible to read the DXF file and display the hole pattern as well as outward of plate on screen. ·
DAMA’S drill
machine is a strong cantilever structure, that correspond to humane
engineering designed,to allow compact · The machine’s X,Y axes, were equipped ball screw , AC servo motor and linear guide, providing accurate positioning. · The machine, CNC controller, hydraulic power system that is integrated design, to allow easy installing ·
The alignment and hydraulic fixture of
plate which are two in one designed, the plate load, unload, clamp quickly
and ·
The machine with two work area on the
table, while one side of table is working another side of table allow
user · With avoid spraying designed to save cooling water and keep the where environment clean. ·
The spindle unit with automatic initial
high for drilling: The spindle unit is provided with a sensitive self- · The spindle rpm is provided with an inverter controlled and by knob adjusted also the number of rpm is displayed on LCD. · Program hold can be active in any time while the tool dull, after replace tool, easy return and restart. · With center drilling function, easy check the hope pitch of plate ·
The machine is provided with Auto-Off
function. This function is suit a large plate and that there is a lot of hole
to be drilled on · It’s also can option the chip conveys, for chip collect and clean. |
Specifications:
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
*This information is subject to
change without prior notice.
|
|
|
|