-
With interactive command and color display, easy
learn and easy operation
-
With linear, matrix and flange drill pattern. It
would not need the G, M code program.
-
With simulation function, it also can indicate which
hole will be drilling by move coarser
-
It is possible to read the DXF file and display the
hole pattern as well as outward of plate on screen.
-
DAMA’S drill machine is a strong gantry structure, it
needs space save 1/2.
-
DAMA’S drill machine is a compact design.
The gantry machine, CNC controller, hydraulic
power system those were integrated.
-
The distance of two spindle that can be
adjusted by hand-wheel and two spindle also can be active individually
or simultaneously to reach the flexible goal.
-
With keep tight equipment to insure machine stable
while machine is drilling.
-
The alignment and hydraulic fixture of plate
which are two in one designed, the plate load, unload, clamp quickly and
convenience.
-
The machine with four work area on the table,
while one side of table is working another side of table allow user to
load or unload plate. Thus, the machine there is no idle time and twice
the amount of drilling.
-
With avoid spraying designed to save cooling water
and keep the environment clean.
-
The spindle unit with automatic initial high for
drilling:
-
The spindle unit is
provided with a sensitive self-controlled speed change function for
rapid reach toplate then change to preset
speed for drills.
-
The user does not need consider the tool length and
setautomatic broken chip during
drilling toenhance efficiency.
-
The spindle rpm control by inverter and the
number of rpm is displayed on LCD. The user change rpm by knob
adjusted.
-
Program hold can be active in any time while the tool
dull, after replace tool, easy return and restart.
-
With center drilling function, providing user easy
check the hope pitch of plate
-
The machine is provided with Auto-Off
function. This function suit a large plate and there is a lot of hole to
be drilled on night work.
-
It also can be optioned chip conveys, for chip
collect and clean.
